Denso BHT-BASIC 100 SERIES Скачать руководство пользователя страница 359

Страница: 359 / 577

351

Syntax:

Syntax 1 (Retrieving the current system date):

DATE$

Syntax 2 (Setting the current system date):

DATE$="date"

Parameter:

date

A string expression.

Description:

■

Syntax 1

DATE$

returns the current system date as an 8-byte string. The string has the for-

mat below.

yy/mm/dd

where

is the lower two digits of the year from 00 to 99,

is the month from 01

to 12, and

is the day from 01 to 31.

■

Syntax 2

DATE$

sets the system date specified by

"date"

. The format of

"date"

is the

same as that in syntax 1.

Example:

date$="00/10/12"

• The year

must be the lower two digits of the year: otherwise, the system does

not compensate for leap years automatically.

• The calendar clock is backed up by the battery. (For the system time, refer to the

TIME$

function.)

DATE

I/O function

DATE$

Returns the current system date or sets a specified system date.

Содержание BHT-BASIC 100 SERIES


































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы:

Denso BHT-BASIC 100 SERIES, Руководство программиста, Страница: 359 / 577

Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы: