Denso BHT-BASIC 100 SERIES Скачать руководство пользователя страница 270

Страница: 270 / 577

Chapter 14. Statement Reference

262

Syntax:

OPEN "[drivename:]filename" AS [#] filenumber [RECORD

filelength]

Parameter:

filenumber

A numeric expression which returns a value from 1 to 16.

"[drivename:]filename"

A string expression.

filelength

An integer constant which has the value from 1 to 32767.

Description:

OPEN

opens a data file specified by

"[drivename:]filename"

and associ-

ates the opened file with

filenumber

for allowing I/O activities according to

filenumber

• The maximum number of files which can be opened at one time is 16 including

the bar code device file and communications device files.

•

"filename"

consists of a file name and a file extension.

The file name should be 1 to 8 characters long. Usable characters for the file

name include alphabet letters, numerals, a minus (-) sign, and an underline (_).

Note that a minus sign and underline should not be used for the starting character

of the file name. Uppercase and lowercase alphabet letters are not distinguished

from each other and both are treated as uppercase letters.

The file extension should be up to 3 characters long. It should be other than

.PD3, .EX3, .FN3, and .FLD and may be omitted (together with a period).

a.dat

master01.dat

• If you set

[drivename]

, the specified file will be opened as a read-only

file; if you set

"A:"

or omit

[drivename]

, it will be opened as a read/write file.

File I/O statement

OPEN

Opens a data file for I/O activities.

Содержание BHT-BASIC 100 SERIES


































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Denso BHT-BASIC 100 SERIES, Руководство программиста

Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы:

Бренды по названию

Популярные бренды