Denso BHT-BASIC 100 SERIES, Руководство программиста

Страница: 208 / 577

Chapter 14. Statement Reference
200
■
Calling a user-defined function
FNfunctionname calls a user-defined function.
• The number of
realparameter
s should be equal to that of
dummyparame-
ter s, and the types of the corresponding variables used in those parameters
should be identical.
• If you specify a global variable in
realparameter
when calling a user-defined
function, the user-defined function cannot update the value of the global variable.
This is because all realparameter s are passed not by address but by value.
(So called "Call-by-value")
Syntax errors:
■
When creating a user-defined function
Error code and message Meaning
error 59: Incorrect use
of DEF FN...
EXIT DEF...END
DEF
• The EXIT DEF statement is speci-
fied outside the function definition
block.
• The END DEF statement is specified
outside the function definition block.
error 60: Incomplete
control struc-
ture (DEF FN
...END DEF)
END DEF
is missing.
error 61: Cannot use DEF
FN in control
structure
The
DEF FN
...
END DEF
statement is
defined in other block-structured state-
ments such as
FOR and IF statement
blocks.
error 64: Function
redefinition
You made double definition to a same
function name.
error 71: Syntax error • functionname is an integer func-
tion name, but generalexpres-
sion is a real type. (If
functionname is a real function
name and generalexpression
is an integer type, then no error
occurs.)
•
stringlength
is out of the
range.
• stringlength is not an integer
constant.
• The function name is assigned a
value outside the function definition
block.