Denso BHT-BASIC 100 SERIES Скачать руководство пользователя страница 178 | Manualshive

Страница: 178 / 577

Denso BHT-BASIC 100 SERIES Скачать руководство пользователя страница 178

Chapter 14. Statement Reference

170

• If you issue more than one

APLOAD

statement specifying a same character code,

the last statement takes effect.

• Only when the Interpreter executes the

APLOAD

statement, it refers to the array

data defined by

fontarrayname

. So, once a user program has finished load-

ing the user font, changing the data in the array or deleting the array itself (by the

ERASE

statement) will not affect the already loaded user font.

• An array integer variable--a work array, register array, or common array--for

fon-

tarrayname

should be declared by the

DIM

,

DEFREG

, or

COMMON

statement,

respectively.

DIM cp0%(11)

DEFREG cp1%(11)

COMMON cp2%(11)

The array variable should be one-dimensional and have at least 12 elements.
Each element data should be an integer and stored in the area from the 1st to
12th elements of the array.

• Also when the double-width, double-height, or quadruple-size is specified, user-

defined fonts loaded by the

APLOAD

will be effective. The system will enlarge the

dot pattern of each loaded font in double-width, double-height, or quadruple-size.
For details, refer to Chapter 7, Subsection 7.1.3, "Dot Patterns of Fonts."

■

Loading a user-defined cursor

APLOAD

loads a user-defined cursor data defined by

cursorarrayname

to the

user font area specified by

characode

.

• To display a user-defined cursor loaded by the

APLOAD

, you set 255 to the

cur-

sorswitch

in the

LOCATE

statement in the single-byte ANK mode. (

LOCATE

,,255

)

• The loaded user-defined cursors are effective during execution of the user pro-

gram which loaded those cursors and during execution of the successive user

programs chained by the

CHAIN

statement.

• Only when the Interpreter executes the

APLOAD

statement, it refers to the array

data defined by

cursorarrayname

. So, once a user program has finished

loading the user cursor, changing the data in the array or deleting the array itself

(by the

ERASE

statement) will not affect the already loaded user cursor.

«
...
176
177
178
179
180
...
»

Содержание BHT-BASIC 100 SERIES


































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов