Denso BHT-1260BWB-CE, Руководство пользователя

Страница: 175 / 251

163
Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
4.7.8 Exit the WWAN Manager
The WWAN Manager is still running in the background after the main window is closed.
To display the WWAN Manager again or exit the WWAN Manager,
select: "Show" or "Exit" in the contextual menu shown by holding down
the WWAN Manager icon in the Windows task bar.
Double tapping the "Wireless WAN" icon in the System Properties is another way to redisplay the WWAN
Manager.
4.7.9 Automatic Power Restore
The 3G module stays in power saving mode even after the BHT goes into suspend mode by turning the
power off.
However, the 3G module will be forcibly powered off when either one of the following events occurs.
- The battery cover is opened.
- The battery voltage is dropped below the level of proper startup.
After the forcible shutdown, the 3G module power automatically restores when the BHT is turned on.
The following message will appear if the WWAN manager is activated after the automatic power restore of
the 3G module.
Data connection will not resume on automatic power restore.
Reconnect to the network manually after confirming that the BHT is in the 3G service area either by
tapping the "Connect" button in the "General" tab or by using the application.
4.7.10 Error Message
Error Message Solution
Data connection is not configured. Configure the settings in the
“DataConnection” tab
menu.
The connection name is invalid.
Correct it.
The connection name must be alphanumeric with at
least one character.
The following symbols cannot be used for the
connection name.
| > < ? * \ / :
The connection name already exists.
Change it.
The connection name entered already exists.
Change the connection name.
Data Connection has been terminated. Retry
the connection.
Data Connection has been terminated.
Restart the data communication
RasDial Error XXX Refer to the link below for the error code details.
http://support.microsoft.com/kb/163111/en-us
Insert SIM card. Insert SIM card.
PIN1 is a 4 to 8 digits code. Enter a 4 to 8 digits code for PIN1.
PUK1 is an 8 digits code. Enter an 8 digits code for PUK1.
PIN1 is incorrect. Enter the correct PIN1.
PUK1 is incorrect. Enter the correct PUK1.