16
Configuration
Important
: All items in the Shortcuts screen are also in the Preferences. If you change a setting in one screen, it will also
change it in the other.
Shortcuts
To open the Shortcuts screen
, press
Shortcuts
.
To close the Shortcuts screen
, tap the
X
in the upper-right corner, or press
Shortcuts
again.
In the
Shortcuts
screen, tap an option to select it:
•
Layer Color
:
This setting determines the color of the light ring around the platter for each layer. Tap
A
or
B
in
the center to select the layer, and then tap a color to select it. The light ring will change color immediately. Tap
the
X
to return to the previous screen.
•
Cue
/
Loop Quantization
: This setting determines the degree of quantization for time-based features. Select
1
/
8
beat,
1
/
4
beat,
1
/
2
beat,
1
beat, or
4
beats.
•
Sync Mode
: This setting determines the degree of synchronization applied when you press the Sync button on
SC6000 PRIME:
•
Bar
: The tempo will be synced, and the track will be automatically bar-matched with the track on the
master unit (the downbeats of each bar will be aligned).
•
Beat
: The tempo will be synced, and the track will be automatically beat-matched with the track on the
master unit.
•
Tempo
: Only the tempo will be synced (the BPM will match that of the master deck).
•
Screen Brightness
: This setting determines the brightness of the touchscreen:
Low
,
Mid
,
High
, or
Max
.
•
Player #
: This setting determines the number of this player. When selecting a source device to browse, this
number is shown next to the device name in the display.
Preferences
To open the
Preferences screen
, press and hold
View
/
Preferences
/
Utility
and then tap the
Preferences
tab.
To close the Preferences screen
, tap the
X
in the upper-right corner, or press
View
/
Preferences
/
Utility
again.
In the
Preferences
screen, swipe up or down to scroll through the options, and tap an option to select it:
Playback
•
Track Start Position
: This setting determines where the beginning of a track is after it loads. Select the actual
start of the file (
Track Start
) or the automatically detected beginning of an audio signal (
Cue Position
).
•
Default Speed Range
: This setting determines the range of the
pitch fader
. Select
+4%
,
8%
,
10%
,
20%
, or
50%
.
•
Sync Mode
: This setting determines the degree of synchronization applied when you press the Sync button on
SC6000 PRIME:
•
Bar
: The tempo will be synced, and the track will be automatically bar-matched with the track on the
master unit (the downbeats of each bar will be aligned).
•
Beat
: The tempo will be synced, and the track will be automatically beat-matched with the track on the
master unit.
•
Tempo
: Only the tempo will be synced (the BPM will match that of the master deck).
•
Sync Button Action:
This setting determines how the
Sync
button will act when pressed.
•
Toggle:
This mode allows you to toggle sync on and off without having to hold
Shift
.
•
Shift Disable:
This mode requires
Shift
to be held in order to turn off sync.
•
Pitch Control Type:
This setting determines the primary function of the Pitch Bend buttons. Select
Pitch Bend
to keep the primary function as momentarily reducing or increasing the pitch, or select
Range
to set the primary
function to adjusting the range of the pitch fader. The function not used as the primary will still be available by
holding
Shift
and using the
Pitch Bend
buttons.