Denon SC5000 PRIME, Руководство пользователя, Страница: 14 / 37

14
SC5000M PRIME
Top Panel
Media Selection & Browsing
1. Touchscreen : This full-color multi-touch
display shows information relevant to
SC5000M PRIME’s current operation.
Touch the display (and use the hardware
controls) to control the interface. See
Operation > Touchscreen Overview for
more information.
2. Media Selection : These lights will
illuminate to indicate if the corresponding
type of media is connected:
USB , SD , or
Network .
3. Source : Press this button to show a list
of available devices connected to
SC5000M PRIME in the touchscreen
(other networked SC5000M PRIME units,
USB drives, SD card, etc.). Tap a device
in the list to select it.
4. Media Eject : Press this button to show a
list of available devices connected to
that SC5000M PRIME unit in the
touchscreen (i.e., USB drives connected
to its USB ports or an SD card inserted
into its SD card slot).
To eject a device , make sure none of its
tracks are being played, and then tap the
Eject icon on the touchscreen and
follow the prompts.
5. Back : While in Library View, press this button to move to the previous window. While in Performance
View, press this button to enter Library View.
6. Forward : While in Library View, press this button to move to the next window. While in Performance
View, press this button to enter Library View.
7. Select/Load : While in Browse View, turn this knob to scroll through a list, and press the knob to select
an item or load a track to the layer in focus. Double-press the knob to load a track to both layers (“instant
doubles”). While in Performance View, turn this knob to zoom in and out of a track’s waveform. Press
and hold the knob to adjust the beat grid (see
Operation > Performance View for more details on
adjusting the beat grid).
Press and hold Shift and then press and hold this knob to manually adjust cue/loop point locations left
or right using the touchscreen controls.
8. View / Preferences / Utility : Press this button to switch between Library View and Performance View.
Double-press this button to enter the Engine Lighting view. Press and hold this button to enter the User
Profile menu.
Press and hold Shift and press this button to toggle between viewing single layer or dual layer waveforms
on the touchscreen . You can also press and hold Shift and then press and hold this button to swap deck
positions.
9. Shortcuts : Press this button to open the Control Center , which includes quick links to other menus
such as Source, User Profile and Settings.
1
2
3
4
5 6
7
8
9
10
12
13
14
15
16
17
18
19
20
21 22
23
24
25
26
27 28 29 30 31
32
33
34
11