Denon SC5000 PRIME, Руководство пользователя, Страница: 29 / 37

29
Cues/Loops
•
Cue / Loop Quantization : This setting determines the degree of quantization for time-based features: hot
cue points, loops, and loop rolls. Select 1 / 8 beat, 1 / 4 beat, 1 / 2 beat, 1 beat, or 4 beats.
•
Paused Hot Cue Behavior : This setting determines how pads will play their hot cue points. When set to
Momentary , playback will start from a hot cue point when you press and hold its pad—release the pad
to return to the hot cue point. When set to Trigger , playback will start from a hot cue point (and
continue) when you press and release its pad.
•
Default Loop Size : This setting determines the default size of an auto loop when you load a new track to
the deck: None , 1 , 2 , 4 , 8 , 16 , or 32 beats. When None is selected, the autoloop size will not reset when
a new track is loaded.
•
Smart Loops : This setting determines whether or not a manual loop will be automatically expanded or
reduced to a conventional length (e.g., 2 beats, 4 beats, 8 beats, etc.) when you set it. Select On or Off .
This setting works independently of the quantization setting.
•
Move Cue To Loop In: This setting determines whether the song's initial Cue Point will automatically be
moved to the start of a loop ( On ), or remain at its current point ( Off ).
•
Saved Loop Behavior: This setting determines the action of loops after they have been saved. When set
to Reloop , pressing a pad with a saved loop will start playing the loop again. When set to Disable ,
pressing a pad with a saved loop will turn off the loop.
Display
•
Track Title: This setting determines whether tracks titles are shown as the track's Filename or its
embedded Metadata (tags).
•
Time Format : This setting determines how pitch adjustment affects the track time display. When set to
Static , the track’s time corresponds to locations in the track as usual; adjusting the pitch does not affect
it. When set to Dynamic , the track’s time will automatically adjust to account for changes in pitch. For
instance, if you set the pitch fader to -8% , the track time will increase so it is 8% longer.
•
Track End Warning : This setting determines how long before the end of a track PRIME will warn you
that it is nearing the end. If the track is on the currently selected layer, the platter ring and track
overview will flash. If the track is on the opposite layer, the Layer button will flash.
•
On Air Mode: This setting changes the platter ring illumination when the channel fader on the Denon DJ
mixer is up or down, indicating an active or "on air" deck. When this setting is On , raising the channel
fader will change the platter color from white to the selected color. When this setting is Off , the user-
selected color will always be shown regardless of the channel fader position.
Note: This requires a connection to a compatible Denon DJ mixer via Ethernet.
Safety
•
Lock Playing Deck : This setting determines whether or not you will be able to load a track to the deck
as it is playing. Select On or Off . When this setting is on, the deck must be paused in order to load a track
to it.
•
Needle Lock : This setting determines whether or not you can tap the track overview in the display to
jump to that location in the track during playback. Select On or Off . You can use the track overview while
playback is stopped regardless of this setting. Alternatively, make sure the platter is in Vinyl Mode (press
Vinyl so it is lit), touch the top of the platter, and tap the desired location in the track overview.
•
Pad Lock : This setting determines whether the pads and pad mode buttons ( Hot Cue , Loop , Roll ,
Slicer ) are enabled or disabled. Select On or Off .