Denon SC5000 PRIME, Руководство пользователя, Страница: 28 / 37

28
User Profile
To open the User Profile menu , press and hold View .
To close the User Profile menu , press View again.
In the User Profile menu, swipe up or down to scroll through the options, and tap an option to select it:
Playback
•
Motorized Platter Start (SC5000M PRIME only): This setting will determine how quickly your track
starts to play. When set to Normal , the track will play in relation to the motor start-up speed. When set
to Instant , the song will begin playing immediately, and the motor and platter will catch up to the song
within a few milliseconds.
•
Track Start Position : This setting determines where the beginning of a track is after it loads. Select the
actual start of the file ( Track Start ) or the automatically detected beginning of an audio signal ( Cue
Position ).
•
Default Speed Range : This setting determines the range of the pitch fader . Select +4% , 8% , 10% ,
20% , or 50% .
•
Nudge Sensitivity (SC5000M PRIME only): This determines the level of sensitivity when moving the
platters: Min , Low , Mid , High , or Max .
•
Sync Mode : This setting determines the degree of synchronization applied when you press the Sync
button:
o
Bar : The tempo will be synced, and the track will be automatically bar-matched with the track on the
sync lead deck (the downbeats of each bar will be aligned).
o
Beat : The tempo will be synced, and the track will automatically beat-matched with the track on the
sync lead deck.
o
Tempo : Only the tempo will be synced (the BPM will match that of the sync lead deck).
•
Sync Button Action: This setting determines how the Sync button will act when pressed.
o
Toggle: This mode allows you to toggle sync on and off without having to hold Shift .
o
Shift Disable: This mode requires Shift to be held in order to turn off sync.
•
Always show Sync Lead Button: This setting determines whether the Sync Lead button appears over
the main waveforms in Performance View. You can tap this button to set the deck as the sync lead.
•
Pitch Control Type: This setting determines the primary function of the Pitch Bend buttons. Select Pitch
Bend to keep the primary function as momentarily reducing or increasing the pitch or select Range to
set the primary function to adjusting the range of the pitch fader. The function not used as the primary
will still be available by holding
Shift and using the Pitch Bend buttons.