Denon SC5000 PRIME, Руководство пользователя, Страница: 25 / 37

25
Pad Modes
The 8 pads have different functions in each pad mode. The
Parameter

/

buttons will make adjustments
specific to each pad mode.
To enter each pad mode , press the corresponding button: Hot Cue , Loop , Roll , or Slicer .
Hot Cue Mode
In Hot Cue Mode, you can use each pad to jump to an assigned hot cue point.
Tip : You can use the Engine DJ software to set, name, and assign colors to your hot cue points. The names
and colors will appear in the display for reference.
To assign a hot cue to a pad , press an unlit pad at the desired location in the track. The pad will light
up when a hot cue point is assigned.
To jump to a hot cue point , press the corresponding pad.
To clear a hot cue from a pad , press Shift and the desired pad. The pad will turn off when there is no hot
cue point assigned to it.
Loop Modes
In Manual Loop Mode, you can use each pad to activate an assigned loop. Pressing Loop for the first time
will always enter Manual Loop Mode.
Tip : You can use the Engine DJ software to set and name your loops. The names will appear in the display
for reference.
To assign a loop to a pad and activate it , press an unlit pad to create a Loop In point at the current
location, and then press it again to create the Loop Out point at another location. You can also assign
an auto loop to a pad by pressing an unlit pad while in the auto loop. The loop will activate
immediately, and the pad will light up.
To activate a loop , press the corresponding pad. Once a loop has been created, you can retrigger it by
pressing the corresponding pad again, depending on the Saved Loop Behavior setting.
To enable an active loop, press and hold the Parameter

button and press a pad with a saved loop.
Active loops will begin looping automatically as soon as they are reached and are shown with a striped
pattern in the track waveform. You can also set these in the Engine DJ software.
To delete a loop , press Shift and the desired pad.
In Auto Loop Mode, you can use each pad to create and activate an auto loop. Pressing Loop while in
Manual Loop Mode will enter Auto Loop Mode.
To activate an auto loop , press a pad. The display will show the length of the auto loop for each pad.
To deactivate an auto loop , press the pad again.
Hot
Cue 1
Hot
Cue 2
Hot
Cue 3
Hot
Cue 4
Hot
Cue 5
Hot
Cue 6
Hot
Cue 7
Hot
Cue 8
Loop
1
Loop
2
Loop
3
Loop
4
Loop
5
Loop
6
Loop
7
Loop
8