Denon SC5000 PRIME, Руководство пользователя, Страница: 11 / 37

11
Playback & Transport Controls
10. Layer : Press this button to switch the layer focus of the SC5000 PRIME.
11. Platter : This capacitive, touch-sensitive platter controls the audio playhead when the wheel is touched and
moved. When the Vinyl button is on, move the platter to “scratch” the track as you would with a vinyl
record. When the Vinyl button is off (or if you are touching only the side of the platter ), move the platter to
temporarily adjust the track’s speed.
12. Platter Display: This display shows information relevant to the performance, including the current
playhead position and auto loop size, as well as album artwork. See Operation > Platter Display
Overview for more information.
13. Wheel Adjust : Turn this knob to set how resistant the platter is to adjustments. This knob applies a brake
to the platter to prevent unintentional drifting due to environmental vibrations from bass frequencies,
surface instability, etc.
14. Stop Time : Controls the rate at which the track slows to a complete stop (“brake time”) when you pause
it by pressing Play / Pause (

/

).
15. Vinyl : Press this button to activate or deactivate a “vinyl mode” for the platter. When activated, move the
platter to “scratch” the track as you would with a vinyl record. When deactivated, move the platter to
temporarily adjust the track’s speed, which is useful for beat alignment.
16. Play / Pause (

/

): This button pauses or resumes playback.
Press and hold Shift and then press this button to “stutter-play” the track from the initial cue point.
17. Cue : During playback, press this button to return the track to the initial cue point and stop playback. If you
have not set a temporary cue point, then press this button to return to the start of the track. (To set a
temporary cue point, make sure the track is paused, move the
platter to place the audio playhead at the
desired location, and then press this button.) If the deck is paused, press and hold this button to play the
track from the initial cue point. Release the button to return the track to the initial cue point and pause it.
To continue playback without returning to the initial cue point, press and hold this button and then press
and hold the
Play button, and then release both buttons. During playback, press and hold Shift and then
press this button to set the initial cue point.
18. Track Skip : Press either of these buttons to skip to the previous or next track. Press the Previous Track
button in the middle of a track to return to the beginning of the track.
Press and hold Shift and then press one of these buttons to search backward or forward through the
track.
Sync & Pitch Controls
19. Pitch Fader : Move this fader to adjust the speed (pitch) of the track. You can adjust its total range by
pressing and holding Shift and pressing one of the Pitch Bend buttons.
Important : If Sync is activated, moving the pitch fader on the “primary” SC5000 PRIME unit will change
the speed of all synced units, while moving the pitch fader on other units will do nothing.
20. Pitch Bend – / + : Press and hold one of these buttons to momentarily reduce or increase (respectively)
the speed of the track.
Press and hold Shift and then press one of these buttons to set the range of the pitch fader.
21. Key Lock / Pitch Reset : Press this button to activate or deactivate Key Lock. When Key Lock is
activated, the track’s key will remain the same even if you adjust its speed.
Press and hold Shift and press this button to reset the track’s pitch to its original pitch ( 0% ) regardless
of the position of the pitch fader.
22. Sync / Sync Off : Press this button to activate Sync. To sync two or more PRIME units, press Sync on the
unit that you want to control the BPM, which becomes the “primary.” After Sync is activated on that unit,
press
Sync on any additional units. The tempo of each unit will immediately synchronize to match the
tempo of the primary unit. To deactivate Sync, press the Sync button again, or press and hold Shift and
press Sync , depending on the Sync Button Action setting in the User Profile menu.
23. Master : Press this button to set this SC5000 PRIME unit as the one that controls the lead tempo. All
connected units with Sync activated will use this tempo. If you stop the sync lead unit, the next-longest-
playing unit in the setup will automatically become the new sync lead (unless you change it manually).