Denon PRIME GO, Руководство пользователя, Страница: 6 / 30

6
Devices & File Analysis
PRIME GO can play music files from USB drives, SD cards, or other connected PRIME GO units. Make sure you are using
only the supported file systems (for USB drives or SD cards) and file formats (for music files) listed below.
Supported file systems : exFAT, FAT32
Supported file formats : AAC/M4A
AIF/AIFF (44.1–192 kHz, 16–32-bit)
ALAC
FLAC
MP3 (32–320 kbps)
MP4
Ogg Vorbis
WAV (44.1–192 kHz, 16–32-bit)
Although PRIME GO can play tracks that have not been analyzed yet, pre-analyzing them allows its features to work
most effectively. You can analyze tracks in one of two ways:
•
On PRIME GO, load the track : When you load a track to play, PRIME GO will automatically analyze it (if it has
not already been analyzed). This may take a moment to complete, depending on the length of the track. You can
start playing the track from the beginning
immediately , though you will need to wait a moment for the analysis
to finish.
•
Use Engine Prime software : The included Engine Prime software can pre-analyze your music library to use
with PRIME GO. You can also use it to organize your library by creating crates and playlists. It also manages
your PRIME GO hardware preferences (see
Operation to learn more about this).
Visit denondj.com/downloads and find the webpage for PRIME GO to download the Engine Prime software.
To eject a USB drive or SD card :
1. Make sure none of its tracks are being played on any connected PRIME media players.
2. Press Eject . A list of connected devices will appear in the main display.
3. Tap the eject icon for the device you would like to eject. If a track on the device is currently playing, you will be
asked if you want to continue ejecting, which will stop the track. Tap
Cancel to cancel ejecting the device, or tap
Eject Anyway to eject it.
To eject additional devices , repeat Step 3.
To return to the previous screen , press Eject again, or tap the X in the upper-right corner.
Configuration
PRIME GO has several settings that you can customize in the Utility (basic settings) and Preferences (advanced settings)
menus. See
Operation > Menu to learn about these settings.