20
Menu
Press and hold the View button
to open the Menu. Here,
you can access the following pages.
Click the links below to jump to that part of the guide:
•
This screen is used to edit the settings of the
PRIME GO hardware.
•
This screen is used to edit your
performance preferences.
•
This screen is used for selecting your source
media device.
•
This screen is used for recording and saving
your performances.
Utility
Device Settings
•
Wi-Fi:
This setting determines whether Wi-Fi connectivity is enabled (
On
) or disabled (
Off
).
•
Wi-Fi Settings:
Tap
Open
to view available wireless networks. Tap the
gear icon
next to the network name to view
information about the network.
•
Track Preview:
When active, Track Preview will reveal a play button for each song in the library, allowing the songs
to be auditioned in the cue without loading a song to the deck. Select
On
or
Off
.
•
Nudge Sensitivity:
This determines the level of sensitivity when moving the platters:
Low
,
Mid
,
Norm
, or
High
.
•
Screen (Plugged In):
This setting determines the brightness of the main display when the power cable is plugged
in:
Low
,
Mid
,
High
, or
Max
.
•
Screen (Battery):
This setting determines the brightness of the main display when running on battery power:
Low
,
Mid
,
High
, or
Max
.
Mixer Settings
•
Mic Attenuation:
This setting determines the amount of additional attenuation for the
Microphone Input
, from
-20
to
0 dB
.
•
Send Mic to Booth:
This setting determines whether the microphone signal is sent to the booth outputs (
On
) or not
(
Off
).
•
EQ Type:
This setting determines the type of equalization for the
Channel EQ
knobs. Select
Isolate
for EQ bands
with infinite cut for full band "kills," or select
Norm
for EQ bands with limited cut.
•
ISO EQ High Xover:
When EQ Type is set to Isolate, this setting determines the crossover frequency between the
Mid and High EQ bands, from
1000
to
8000 Hz
.
•
ISO EQ Low Xover:
When EQ Type is set to Isolate, this setting determines the crossover frequency between the
Low and Mid EQ bands, from
100
to
800 Hz
.
•
Filter Resonance:
This setting determines the amount of resonance of the Sweep FX when assigned to Filter, from
0
to
15
.
•
Filter Extreme Type:
This setting determines the effect of the Sweep FX when assigned to Filter at the extreme low
and high ends. Select
Kill
for the filter extremes to end in silence, or select
Bleed
to allow the extreme end of the
filter to play.
•
Cue Solo Mode:
This setting determines how many channels can be sent to the cue mix. Set to
On
to have only
one channel at a time in the cue mix, or set to
Off
to cue multiple channels at a time.
Содержание PRIME GO
Страница 1: ...User Guide English...
Страница 29: ...29...
Страница 30: ...denondj com Manual Version 1 0...