Denon PRIME GO, Руководство пользователя, Страница: 13 / 30

13
Central Library Preview
Swipe up or down to browse tracks.
Tap and drag the scroll bar to quickly browse through tracks.
Swipe right to load a track to the right deck.
Swipe left to load a track to the left deck.
Tap Library to open the full Library screen. See Library View for more information.
Tap Search to search for tracks using the keyboard that appears in the display.
The toolbar at the top of the display will show the current Quantize Status , Continue Status , Recording Status , and
Talkover Status . Swipe down from this area to open the mini-menu, where you can quickly adjust the following
parameters:
•
Quantize: Tap this to enable or disable quantization. When enabled, time-based features like triggering cues and
loops will snap to the beat-grid according the Cue/Loop Quantization setting in the Preferences .
•
Continue: Tap this to enable or disable continuous playback, which will keep playing the next track when the active
track has ended.
•
Record: Tap this to quickly jump to the Record page.
•
Stop Time: Use this slider to adjust the stop time, or how long the track takes to stop playing after the pause
button is pressed.
•
Contour: Use this slider to adjust the slope of the crossfader curve. Slide towards the left for a smooth fade (mixing)
or slide to the right for a sharp cut (scratching). The center position is a typical setting for club performances.
•
Preview Volume: Use this slider to adjust the volume of tracks auditioned in the cue.
•
FX Enabled: Tap this to enable or disable FX 1 and FX 2 . When enabled, the FX selection and parameters will be
shown under the track overview in Vertical Waveform View or at the bottom of the touchscreen in Horizontal
Waveform View.
Swipe Left to
Load to Left
Deck
Swipe Right to
Load to Right
Deck
Tap and
Drag
to Quickly
Scroll
Tap to Open
Library View
Tap to
Search