Selecting the speakers for audio output
1
Press SPEAKERS on the main unit to select the
speaker system to be used for playback.
The setting changes each time the button is pressed.
Speakers A
(Default):
Outputs audio from Speakers A only.
Speakers B:
Outputs audio from Speakers B only.
Speakers A+B:
Outputs audio from both Speakers A
and Speakers B.
Off:
No audio is output from the speakers.
Selecting the input source
1
Press the input source select button to be played back.
The selected input source appears on the display.
0
You can also press SOURCE to select the input source.
0
You can also select the input source by turning INPUT SELECTOR on the main
unit.
0
If you press the NETWORK button, the input source is switched to the one that
was previously played on the network. If you cannot access the input source that
was previously played from on the network, open “HEOS Music” on the display.
0
To play from a stream or USB flash drive using the network function, use the
0
If you playback from the HEOS App when the power of this device is on, it
automatically switches to the input source that is playing.
0
This unit switches between Optical 1, 2 and 3 each time OPTICAL is pressed.
33
