Denon PMA-30, Руководство пользователя, Страница: 29 / 57

Listening to music via a digital
connection (COAXIAL/OPTICAL-1/
OPTICAL-2)
1
Use INPUT SELECT
df
to switch the input source to
“COAXIAL”, “OPTICAL-1” or “OPTICAL-2”.
The digital audio signal that is being input is shown as follows in the
display.
.
or
or
(xxxx is the sampling frequency.)
0
If the sampling frequency cannot be detected, “Unlocked” will be
displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
2
Play back music on the connected device.
The speakers output music from the connected device.
o
Audio signals that can be played back
See “D/A Converter” (
v
p. 50).
NOTE
0
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise
and could damage the speakers.
Contents Connections Playback Settings Tips Appendix
29
Front panel Display Rear panel Remote Index