Denon DN-MCX8000, Руководство пользователя, Страница: 43 / 51

43
Pad Modes
The pads on each deck of MCX8000 using Engine have different functions depending on the
current Pad Mode:
Cue Mode , Roll Mode , and Slicer Mode . These modes are described on
the following pages.
Cue Mode
In Cue Mode, each pad assigns a hot cue point or returns the track to that hot cue point.
To enter Cue Mode, press Cue / Cue Loop / Flip so that it lights blue .
To assign a hot cue point, press an unlit pad at the desired point in your track. The pad will
light up when it is assigned.
To jump to a hot cue point, press a lit pad.
To delete an assigned hot cue point, press and hold Shift and press the corresponding pad.
Roll Mode
In Roll Mode, Pads 1 – 4 (the top row) trigger a momentary Loop Roll while Pads 5 – 8 (the
bottom row) will let you Beat Jump or adjust the Beat Jump Range.
To enter Roll Mode, press Roll / Saved Loop so that it lights aqua .
To trigger a Loop Roll, press the corresponding pad ( 1 – 4 ).
To perform a backward or forward Beat Jump, press Pad 5 or 8 , respectively.
To halve or double the Beat Jump Range, press Pad 6 or 7 , respectively. Alternatively,
press X1 / 2 or X2 , respectively.
To shift the Loop Roll left or right, use the

/

buttons.
To perform a backward or forward Beat Jump, press and hold Shift and then press the

or

button, respectively. You can move up to 4 seconds in either direction from the initial location.
Cue 1 Cue 2 Cue 3 Cue 4
Cue 5 Cue 6 Cue 7 Cue 8
1/8-beat
Loop Roll
1/4-beat
Loop Roll
1/2-beat
Loop Roll
1-beat
Loop Roll
Beat Jump
<<
Beat Jump
Range <<
Beat Jump
Range >>
Beat Jump
>>