Denon DN-MCX8000, Руководство пользователя, Страница: 27 / 51

27
Slicer Loop Mode
Important: Your track must have a set beatgrid for this mode to work.
In Slicer Loop Mode, the eight pads represent eight sequential beats—“Slices”—in the beatgrid.
The currently playing slice is represented by the currently lit pad; the light will “move through
the pads” as it progresses through the eight-slice phrase, which will loop (this is the difference
between this mode and Slicer Mode). You can press a pad to play that slice. When you release
the pad, the track will resume normal playback from where it would have been in the loop if you
had never pressed it (i.e., as if the track had been playing forward the whole time).
To enter Slicer Loop Mode, press Slicer / Slicer Loop so that it lights blue .
To play a slice, press the corresponding pad.
To halve or double the length of the loop, press X1 / 2 or X2 , respectively.
To decrease or increase the slice quantization size, use the

/

buttons.
To decrease or increase the Slice Domain size, press and hold Shift and use the

/

buttons.
Slice 1 Slice 2 Slice 3 Slice 4
Slice 5 Slice 6 Slice 7 Slice 8