Denon DN-300UI, Руководство пользователя

Страница: 5 / 60

5
Setup
Important: Connect all cables securely and properly (with stereo cables: left with left, right
with right), and do not bundle them with the power cable.
1. Use XLR cables or a stereo RCA cable to connect the Outputs ( balanced or unbalanced )
to the analog inputs of your external receiver, amp, powered monitors, etc.
2. Use stereo RCA or 1/8” (3.5 mm) cables to connect any optional external devices to the
Aux In on the front or back of the unit.
3. Connect the WLAN Antenna and FM Antenna on the back of the unit, if needed.
4. After completing all the connections, use the included power cable to connect the AC In to
a power outlet.
5. Power on all of your audio sources.
6. Power on DN-300UI.
7. To connect DN-300UI to a network , press the Menu button, select Configuration and
choose Network . To have DN-300UI automatically configure network settings, select your
desired connection type: Wired Network Configuration , Wireless Network
Configuration , or Wireless Network (WPS PBC) . To manually configure network settings,
select Manual Configuration . For wired network connections, make sure DN-300UI is
connected to your network switch or router by Ethernet cable from the RJ45 Port .
R L
WLAN
RJ45 FM ANTENNA R L R L
TX /RX
LINK
OUTPUT OUTPUT AUX IN
DN- 300 UI
VOLUME / SELECT
PUSH
ENTER
IR
AUX IN
OFF
ON
POWER
USB
5 V 1A
POWER MUTE SLEEP MENU MODE
FAVORITE ENTER DIMMER VOL+ VOL-
Items not listed under Introduction > Box Contents are sold separately.
Powered Speakers
Power
Zone Mixer
USB Flash Drive
CD Player
Router
Smartphone,
tablet, etc.
FM Antenna