Denon CEOL RCD-N10 Скачать руководство пользователя страница 64

Страница: 64 / 79

1-8. Heat run mode

• Heat run mode is run for the selected mode.

• Insert the disc first.

• If an error occurs, an error display appears and the operation stops immediately.

The number of operations is saved at this time.

See "

1-8-4. Error display

" for details on the error.

• During the heat run operation, the operation of each button is not valid.

1-8.1. Starting up

Insert the AC plug while pressing button "

POWER

", and wait for more than 3 seconds.

Release the "

POWER

" button when the Power indicator turns orange and the Eject indicator turns

white.

Select the "

Heatrun Mode

" using the "

CURSOR

" button, then press the "

ENTER

" button to con-

firm.

This mode is canceled when the power is turned off.

1-8.2. Displays

(1) "

Heatrun Mode

" is shown on the display for 5 seconds.

• Heat run Mode Menu display

Heat run mode Details

No.

Mode

Descriptions

H.R.Normal

(Heat run normal mode)

Play the disc from the first track to the last track.

H.R.Short

(Hear run short mode)

Plays only the last track of the disc.

H.R.Chucking

(Heat run Chucking mode)

Repeatedly performs "TOC Load" and "Search for first track of the disc".

1-8-1. Heat run normal mode

Select the "

H.R. Normal

" using the "

CURSOR

" button, then press the "

ENTER

" button to confirm.

• This sets the heat run repetition count to 0.

• Repeatedly performs the following operations.

Play the disc from the first track to the last track.

When playback of the disc is finished, move the pickup to the inner circumference and open the

tray.

When the loader OPEN status is detected, close the tray again and start playing the disc from the

first track after TOC has been loaded.

An increment is added to the heat run count when the tray is opened.

• Press the "

CURSOR

" button during heat run operations to display the current heat run repetition

count for 5 seconds.

Returns once again to heat run mode display after 5 seconds.

xxxx: Count display

• Displays normal playback unless displaying the heat run count

1-8-2. Heat run short mode

Select the "

H.R.Short

" using the "

CURSOR

" button, then press the "

ENTER

" button to confirm.

• This sets the heat run repetition count to 0.

• Repeatedly performs the following operations.

Plays only the last track of the disc.

When playback of the disc is finished, move the pickup to the inner circumference and open the

tray.

When the loader OPEN status is detected, close the tray again and start playing the disc from the

last track after TOC has been loaded.

An increment is added to the heat run count when the tray is opened.

• Press the "

CURSOR

" button during heat run operations to display the current heat run repetition

count for 5 seconds.

Returns once again to heat run mode display after 5 seconds.

xxxx: Count display

•Displays normal playback unless displaying the heat run count

Before Servicing

This Unit

Electrical

Mechanical

Repair Information

Updating

Содержание CEOL RCD-N10















































































Результаты поиска

Содержание CEOL RCD-N10

Отзывы:

Похожие инструкции для CEOL RCD-N10

Бренды по названию

Популярные бренды

Denon CEOL RCD-N10, Руководство по обслуживанию

Результаты поиска

Содержание CEOL RCD-N10

Отзывы:

Похожие инструкции для CEOL RCD-N10

Бренды по названию

Популярные бренды