Denon AVR-X5200W, Руководство по обслуживанию

Страница: 9 / 219

TECHNICAL SPECIFICATIONS
n
Audio section
• Power amplifier
Rated output :
Front ：
140W+140W (8Ω, 20Hz
-
20kHz with 0.05% T.H.D.)
175W+175W (6Ω, 1kHz with 0.7% T.H.D)
Center :
140W (8Ω, 20Hz - 20kHz with 0.05% T.H.D.)
175W (6Ω, 1 kHz with 0.7 % T.H.D.)
Surround :
140W+140W (8Ω, 20 Hz - 20 kHz with 0.05% T.H.D.)
175W+175W (6Ω, 1 kHz with 0.7 % T.H.D.)
Surround back / Height1 / Front wide / Height2:
140W+140W (8Ω, 20 Hz - 20 kHz with 0.05% T.H.D.)
175W+175W (6Ω, 1 kHz with 0.7 % T.H.D.)
Rated output :
160 W x 2-channel (8 Ω)
250 W x 2-channel (4 Ω)
Output connectors
：
4 - 16Ω
n
Analog section
Input sensitivity/Input impedance
：
200 mV/47 kΩ
Frequency response ： 10 Hz - 100 kHz — +1, -3 dB(Direct mode)
S/N ： 102 dB(IHF-A weighted, Direct mode)
Distortion ： 0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output ： 1.2 V
n
Digital section
D/A output ： Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input ： Format — Digital audio interface
n
Phono equalizer section
Input sensitivity ： 2.5 mV
RIAA deviation
：
±1 dB (20 Hz to 20 kHz)
S/N ： 74 dB (IHF-A)
Distortion factor ： 0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input/output level and impedance ： 1 Vp-p, 75 Ω
Frequency response ： 5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance ： Y signal — 1 Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response ： 5 Hz - 60 MHz — 0, -3 dB
n
Tuner section
Reception frequency range ： FM 87.5 MHz - 107.9 MHz(for E3)
FM 87.5 MHz - 108.0 MHz(for E2, E1C)
AM 530 kHz - 1710 kHz(for E3)
AM 522 kHz - 1611 kHz(for E2, E1C)
Effective sensitivity ： FM 1.5μV ( 14.8dBf)
AM
20 μV
50 dB sensitivity ： MONO ― 2.8 μV (20.2 dBf)
S/N ratio (IHF-A)
：
MONO ― 78 dB
STEREO ― 68 dB
HD ― FM 85dB AM 85dB
Distortion (1 kHz) ： MONO ― 0.1 %
SRETEO ― 0.2 %
HD ― FM 0.02% AM 0.02%
n
Wireless LAN section
Network type
(wireless LAN standard): Conforming to Wi-Fi® z 1
Security ： WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency
：
2.4 GHz
No. of channels ： 1 - 11 ch (for E3)
1 - 13 ch (for E2, E1C)
z 1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
Logo are registered trademarks of the Wi-Fi Alliance.
n
Bluetooth section
Communications system ： Bluetooth Version 2.1 + EDR
(Enhanced Data Rate)
Transmission power ： Maximum 2.5 mW (Class 2)
Maximum communication range ： Approx. 32.8 ft/10 m in line of sight
Frequency band ： 2.4 GHz band
Modulation scheme ： FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles
：
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.4 (Audio Video Remote Control Profile)
Corresponding codec
：
SBC, AAC
Transmission range (A2DP) ： 20 Hz - 20,000 Hz
n
General
Power supply ： (for E3) : AC 120 V, 60 Hz
(for E2) : AC 230 V, 50 Hz / 60Hz
(for E1C) : AC 220 V, 50 Hz
Power consumption
： 730W
Power consumption in standby mode ： 0.1W
Power consumption in CEC standby mode ： 0.5W
Power consumption in network standby mode ： 4.5W
For purposes of improvement, specifications and design are subject to
change without notice.
DIMENSION
Unit： in. (mm) Weight： 31 lb 1 oz (14.1 kg)
17 1/8 (435)
9 21/64 (237)
2 11/64
(55)
2 3/4 (70)
19/32 (15)
5 63/64 (152) 6 37/64 (167)
9 1/4 (235)
13 11/32 (339) 15 15/32 (393)
55/64 (22) 15/32 (12)
1 17/64
(32)
13 35/64 (344)
2 23/64
(60)
1 51/64 (45.5) 1 51/64 (45.5)
9