TV Format
Set the video signal format to be output for the TV you are using.
o
Format
NTSC
(Default)
:
Select NTSC output.
PAL:
Select PAL output.
0
“Format” can also be set by the following procedure. However, the menu
screen is not displayed. Following the display content to make the setting.
1.
Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same
time for at least 3 seconds.
“V.Format:<NTSC>” appears on the display.
2.
Use the main unit’s TUNER PRESET CH + or TUNER PRESET CH - and
set the video signal format.
3.
Press the main unit’s STATUS to complete the setting.
NOTE
0
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
169
Содержание AVR-X1300W
Страница 274: ......
Страница 275: ... www denon com 3520 10433 00ADA Copyright 2016 D M Holdings Inc All Rights Reserved 274 ...