Denon AVR-1913, Руководство пользователя

Страница: 88 / 154

85
Set up speakers
7
Set up “Channel Select”
Use
ui
to select “Channel Select”, and then press
ENTER
.
Channel Select
Subwoofer Measure
Audyssey Setup
Amp Assign
Channel Select
Start
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
8
Use ui to select a channel, and then press ENTER .
Front Select for setting the front speakers to be used. In this
case, go to step 9.
• “Front” can be set when “Amp Assign” is set to
“Front B”.
Subwoofer
Select for no subwoofers to be used. In this case, go
to step 10.
Surround
Back
Select the number of surround back speakers to be
used. In this case, go to step 11.
• “Surround Back” can be set when “Amp Assign” is
set to “Surround Back”.
9
Use o p to select a front speaker, and then press
ENTER .
A
Select this to use front speaker A.
B
Select this to use front speaker B.
A+B
Select this to use front speakers A and B simultaneously.
10
Use
o p
to set whether or not a subwoofer channel is
measured, and then press
ENTER
.
Measure Set for measuring a subwoofer.
Skip
Set for no measuring of a subwoofer.
11
Use o p to set whether or not a surround back
channel is measured, and then press ENTER .
Measure
(2spkrs)
Set for measuring two surround back speakers.
Measure
(1spkr)
Set for measuring a surround back speaker.
Skip
Set for no measuring of a surround back speaker.
12
Press
o
or
BACK
.
Proceed to page 25 Preparation step 5.
NOTE
After performing Audyssey® Setup, do not change the speaker
connections or subwoofer volume. In event of a change, perform
Audyssey® Setup again.
5
Use o p to select the
configuration of the connected
speakers, and then press ENTER .
Surround Back Setting for 7.1-channel playback using surround
back speakers.
ZONE2 Setting to assign the unit’s built-in power amplifier
for ZONE2 and output the audio in stereo.
Bi-AMP Setting to use the front speakers via the bi-amp
connection.
Front Height Setting for 7.1-channel playback using front height
speakers.
Front B Setting to use the second set of front speakers for
playback.
6
Press
o
or
BACK
to exit the “Amp Assign” setting.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion