Denon AVC-X6700H Скачать руководство пользователя страница 324

Страница: 324 / 342

DTS-ES™ Discrete 6.1
DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format

adding a surround back (SB) channel to the DTS digital surround sound.

Decoding of conventional 5.1-channel audio signals is also possible

according to the decoder.

DTS-ES™ Matrix 6.1
DTS-ES™ Matrix 6.1 is a 6.1-channel audio format that inserts a surround

back (SB) channel to the DTS digital surround sound through matrix

encoding. Decoding of conventional 5.1-channel audio signals is also

possible according to the decoder.

DTS Express
DTS Express is an audio format supporting low bit rates (max. 5.1-

channels, 24 to 256 kbps).

DTS-HD
This audio technology provides higher sound quality and enhanced

functionality than the conventional DTS and is adopted as an optional

audio for Blu-ray Disc.
This technology supports multi-channel, high data transfer speed, high

sampling frequency, and lossless audio playback. Maximum 7.1-channels

are supported in Blu-ray Disc.

DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is an improved version of the conventional

DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling

frequencies of 96 or 48 kHz and up to 7.1-channels of discrete digital

sound. High data bit rate performance provides high quality sound. This

format is fully compatible with conventional products, including

conventional DTS digital surround 5.1-channel data.

DTS-HD Master Audio
DTS-HD Master Audio is a lossless audio format created by Digital

Theater System (DTS). This format provides the facility to support up to 8

audio channels with a sampling frequency of 96 kHz/24 bit resolution and

up to 6 audio channels with a sampling frequency of 192 kHz/24 bit

resolution. It is fully compatible with conventional products, including

conventional DTS digital surround 5.1-channel data.

DTS:X
DTS:X produces a hemisphere of audio, where flyovers as well as ambient

backgrounds become truly enveloping. DTS:X objects enable audio to

move smoothly from one speaker to any other creating life-like realism.

324

Содержание AVC-X6700H






















































































































































































































































































































































Результаты поиска

Содержание AVC-X6700H

Отзывы:

Похожие инструкции для AVC-X6700H

Бренды по названию

Популярные бренды

Denon AVC-X6700H, Руководство пользователя

Результаты поиска

Содержание AVC-X6700H

Отзывы:

Похожие инструкции для AVC-X6700H

Бренды по названию

Популярные бренды