Denon AVC-X6700H Скачать руководство пользователя страница 254

Страница: 254 / 342

The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or

tablet that supports wireless LAN connection.

1. Press and hold the DIMMER and STATUS buttons on the main unit for at least 3

seconds when the power of the unit is on.

2. Connect the wireless LAN of the PC or tablet used to “Denon AVC-X6700H”

when the message “Connect your Wi-Fi device to Wi-Fi network called

“Denon

AVC-X6700H”.” appears in the display.

3. Start up the browser and enter “192.168.1.16/settings/” in the URL.

4. Use the browser to enter the settings, select “Connect” and then exit the

settings.

The Default key of this unit is fixed at “1”. Set Default key of the router to “1” to use.

Settings

Configure the IP address.

If you are using a broadband router (DHCP function), the information

required for network connection such as the IP address will be

automatically configured since the DHCP function is set to “On” in the

default settings of this unit.

Set up the IP Address, Subnet Mask, Default Gateway and DNS server

information only when assigning a fixed IP address or when connecting

to a network without DHCP function.

DHCP
-IP Address
-Subnet Mask

Save

Cancel

-Default Gateway
-DNS

Configures the network settings automatically or manually

Off

Network/Settings

000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000

254

Содержание AVC-X6700H






















































































































































































































































































































































Результаты поиска

Содержание AVC-X6700H

Отзывы:

Похожие инструкции для AVC-X6700H

Бренды по названию

Популярные бренды

Denon AVC-X6700H, Руководство пользователя

Результаты поиска

Содержание AVC-X6700H

Отзывы:

Похожие инструкции для AVC-X6700H

Бренды по названию

Популярные бренды