Demarta Virginio SAS di Belletti Virginio e C, via Bozzalla 20, 13814 Pollone (BI), P.IVA 01530570025,
C.F. 00459790010, Tel. +39 015-9555440
–
F) LIFESPAN
The expected lifespan of this product is five years when used on a daily basis and in compliance
with safety instructions, periodic maintenance and appropriate use, as indicated in this
user’s guide.
The actual lifespan depends on the frequency and the intensity of use.
PRODUCT DESCRIPTION
A) HEADREST
• The headrest is removable and adjustable in height.
B) STRAPS
• The lap belt
• The 4
-point harness
The lap belt
The wheelchair is equipped with a lap belt with adjustable and removable straps. Using the lap belt
ensures a better positioning in case of muscular weaknesses leading to a bad posture and offers
additional security against risks of fall.
Installing the lap belt on the wheelchair:
-
Place and fasten the lap belt with the patient’s lower back fully settled against the backrest of the
seat. Tighten accordingly to prevent the user to slip under the belt and hurt himself.
The lap belt must be fastened. The adjustment by and the vigilance of a third party are necessary.
The lap belt being removable, it is important to check at each use that it is correctly anchored to its
fastenings.
The 4-point harness
Under no circumstances can the straps be considered as a restraint device and therefore strap
loops must always remain accessible to the user for locking and unlocking purposes. Using the lap
belt ensures a better positioning in case of muscular weaknesses leading to a bad posture and
offers additional security against risks of fall.
The harness must be fastened. The adjustment by and the vigilance of a third party are necessary.
The lap belt is removable, therefore it is important to check at each use that it is correctly installed.
THE PUSH BAR
Positioned behind the backrest, it allows you to guide the chair.
