DEMAG DC-Com 1, Руководство по эксплуатации

Страница: 84 / 116

8.5.6.4 Replacing the hook with fittings for 1/1 reeving
Fig. 56
– Remove the existing hook.
Remove both bolts (4) from the new hook.
Remove the upper half of the hook assembly.
DANGER
Load may be dropped
Incorrect assembly may cause loads to be dropped.
During assembly, ensure:
–
that chain link sections (1) are positioned with their collar in bearing (2). Grease the bearing and bearing
seat.
– that retaining pin (3) is correctly fitted when the hook and fittings are assembled.
– Tighten housing bolts (4) according to the tightening torque table.
Tightening torques [Nm] DC-Com 1 DC-Com 2 DC-Com 5 DC-Com 10
Hook assembly 6,8 9,5 25,0
Tab. 60
84
214
80
2 44/291
113