DEMAG DC-Com 1, Руководство по эксплуатации

Страница: 2 / 116

Original operating instructions
Manufacturer
Demag Cranes & Components GmbH
PO Box 67
58286 Wetter, Germany
Please fill in the following table before first putting the unit into service. This provides you with definitive documentation of your
Demag DC chain hoist and important information if you ever have to contact the manufacturer or his representative.
Owner
Where in use
Size
Serial number
Year of manufacture
Operating voltage
Control voltage
Frequency
Wiring diagram number
Tab. 1
Fig. 1 Example of a rating plate
Item Designation
1 Manufacturer See above
2 Chain hoist type

"Model code", Page 18,
 "Selection table", Page 19
3
Serial no., calendar week, year
of manufacture
4
Load capacity, group of mecha‐
nisms

"Model code", Page 18,
 "Selection table", Page 19
5 Chain type, hook path
 "Available hoist chains", Page 77,
 "Model code", Page 18,

"Selection table", Page 19
6 Voltage, frequency

"Hoist motor data", Page 20
7
Type of enclosure, insulation
class

"Operating conditions", Page 27,

"Hoist motor data", Page 20
8 Ambient temperature  "Operating conditions", Page 27
9 Motor Type
 "Selection table", Page 19,
 "Hoist motor data", Page 20
10 Electric key data
 "Hoist motor data", Page 20
11 Conformity symbol
12 Manufacturer's address See above
Tab. 2
The metric system is used in this document and all figures are shown with a comma as the decimal separator.
2
214
80
2 44/291
113
Distributed by Ergonomic Partners
Sales@ErgonomicPartners.com
www.ErgonomicPartners.com
Tel: 314-884-8884