RDM Network Scanner User Guide
Maintaining your scanner
©2021 RDM Corporation
Page 30
Installing the franker cartridge
1.
Remove the front cover of the scanner.
At the back of the scanner, the franker cartridge is held in place by a blue franker latch and a
metal plate.
2.
Lift the blue franker latch.
3.
Pull the franker cartridge out of the scanner by the franker tab.
4.
Insert the new franker cartridge. Make sure the top of the metal plate fits into the slot in franker
cartridge (as pictured).
5.
Secure the franker cartridge:
a.
Push the metal plate towards the body of the scanner (pushing in the franker cartridge).
b.
Lowering the blue latch over the franker cartridge until it snaps closed.
6.
Replace the scanner cover.
How to Install the Franker Cartridge
Alternatively visit:
https://www.youtube.com/user/RDMCorporation/playlists
Franker tab
Metal plate
Franker latch
Franker slot
