Deltafox DP - CAG 2015, Перевод оригинальной инструкции по эксплуатации

Страница: 30 / 184

30
GB
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use.
Many
accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) CAREFUL HANDLING AND USE OF
BATTERy DEVICES
a) Only charge the batteries using
chargers of the DELTAFOX 20V Li-
Ion series.
Risk of fire if a charger that
is suitable for a specific type of battery is
used with other batteries.
b) In the power tools, use only the batter-
ies designed for the purpose. The use
of other batteries may result in injuries
and risk of fire.
c) Keep the unused battery away from
paper clips, coins, keys, nails, screws
and other small metal objects, which
could cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or fire.
d) If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental contact,
rinse off with water. If the liquid gets
into eyes, seek medical assistance.
Leaking battery fluid may cause skin ir-
ritations or burns.
6) SERVICE
Have your power tool serviced by
a qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool is
maintained.
Safety instructions for all
applications
Common safety instructions for grind-
ing, sanding, working with wire brush-
es and cutting grinders:
• This electric tool is to be used as
a grinder, sander, wire brush and
cutting grinder. Follow all safety
instructions, directives, illustrations
and facts which you receive with
the device.
If you do not follow these
instructions, an electrical shock, fire
and/or serious injury may occur.
• This electric tool is not suitable for
cup brushes. Using the electric tool in
ways for which it is not intended may
cause hazards and injuries.
• This electric tool is not suitable
for cup wheels, mounted points or
grinding cones.
Using the electric tool
in ways for which it is not intended
may cause hazards and injuries.
• This electric tool is not suitable for
polishing. Using the electric tool in
ways for which it is not intended may
cause hazards and injuries.
• Do not use any accessories that
are not specifically intended and
recommended for this electric tool
by the manufacturer.
Simply because
an accessory can be attached to your
electric tool does not guarantee safe
operation.
• The allowable rotation speed of the
attachment tools must be at least as