6
Thank you for choosing Deltaco!
1. USB Micro-B contact
2. Reset button
3. MicroSD slot
4. Speaker
5. LED
6. Microphone
Mounting
Use the screws to install the bracket. Place
the camera.
Alternatively, place the camera upright on
a flat surface.
Reset
Press and hold about 5 seconds for reset.
Any changed settings will change to
factory default.
LED
Red = the camera is just turning on or there
is something malfunctioning.
Flashing red= waiting for connection.
Blue = Working correctly.
Flashing blue = Connecting.
ONVIF
For use of ONVIF, please check the prod-
uct’s page on Deltaco’s website.
Install and use
1. Download and install the app “Deltaco
smart home” from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app “Deltaco smart home“.
3. Create a new account or log in to your
existing account.
4. Tap “+” to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm in
the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.
Cleaning and maintenance
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the
device does not operate correctly, replace
it with a new device.
Clean the outside of the device using a
soft cloth.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: [email protected].
ENG