English Manual - Deltaco USB-DVI1
2009-06-01
6
Note: During the install the screen will blank a couple of times. This is normal behavior for
windows when installing new graphics drivers. Once the drivers are installed, attach the
USB-DVI1 Adapter to the computer. The computer will automatically detect the new USB
device and install start the USB-DVI1 Adapter.
USB-DVI1 Adapter Operation
1,
Initial
Use
When the USB-DVI1 Adapter first starts, If no output is seen on the monitor connected to
the USB-DVI1 Adapter, it may be in a mode which cannot be display by the monitor. This
can happen if the monitor does not report its supported modes to the USB-DVI1 Adapter.
Reduce the resolution of the primary display, and in turn the resolution of the USB-DVI1
Adapter until an image is shown. Note that placing the monitor into an unsupported mode
for long periods can damage it. The two main modes of operation, Mirror and Extend are
covered below.
After the driver been installed, you will see a device “WS Tech USB Multi-Display” “WS
Tech USB Multi-Display” same as following picture:
Right click it, to set the mode you like:
Содержание SB-DVI1
Страница 1: ...USB DVI1 USER MANUAL...