2
EN – User Manual
Before you start
In order to prolong battery life, make sure you don´t
charge the speaker until the battery is completely
empty. To ensure this, keep the speaker turned
on until the battery runs out. When you charge
the device for the first time, make sure you keep
charging for at least one hour after the battery is
fully loaded. For optimum battery longevity, repeat
this procedure for the first three charges.
Charging the speaker
The speaker will need to charge before you can use
it. Connect the supplied USB cable to your computer
and your speaker, or use an adaptor (DC 5V 1000mA
recommended) to charge the speaker. A full charge
will take about 4 hours, and the battery-indicator
will light green when fully charged. The battery has a
maximum capacity of approx. 500 charges.
Switching on/off
Press and hold the power button for 3 seconds to
switch on. Press and hold the power button again for
2 seconds to switch off.
Bluetooth Connection
1.
Switch the speaker speaker on. The Bluetooth
logo on the front will blink, and a short sound
will emit from the speaker. The speaker is now
detectable by nearby Bluetooth devices.
2.
Using the connection settings on your
smartphone, tablet, or computer that you wish
to connect your speaker to, search for Bluetooth
devices. When the speaker appears on your
menu, select it.
3.
If a password is required, input “0000”.
4.
When the speaker is properly connected to the
device, the Bluetooth logo will stop blinking.
Connecting via Cable
Using the supplied 3.5mm audio cable, connect an
external music source to the AUX-input.
Press M repeatedly until the display reads “AUX”,
and the connected source will sound.
Playback from MicroSD/TF-card
Insert a MicroSD/TF-card into the MicroSD/TF port.
The speaker will playback the contents of the card
automatically. The speaker supports MP3, WMA and
WAV-formats.
Answer incoming calls
To answer call, press ANSWER.
To hang up call, press ANSWER again.
Listen to FM radio
Press M repeatedly until the display reads “FM”.
To scan for FM radio stations, press and hold PLAY
for 3 seconds. When a new station is found, it is
automatically saved to a new preset. In order to
browse the presets, press NEXT/PREVIOUS. Up to 15
stations can be saved to presets. To edit a preset,
press and hold NEXT or PREVIOUS to scan for a new
FM station.
Thank you for choosing DELTACO. We hope you
enjoy your product.
Support
Please contact us if you have any problems with the
use or installation of your product.
We appreciate you being prepared to provide us
with some basic information such as your operating
system and the item number so that we may better
help you.
Contact us by e-mail:
More product and support information can be
found at
www.deltaco.eu.