3 Intended purpose
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
10
3.
Intended purpose
The inverter may only be used for the specified intended pur-
pose.
The intended purpose of the inverter is defined as follows:
● Use in stationary solar systems connected to the public grid,
for converting DC voltage generated by the solar modules
in the solar system into AC voltage that is fed into the public
grid.
● Use in conformance with the power specifications and envi-
ronmental conditions specified by the manufacturer.
The following uses are regarded as
not the intended purposes
:
● Use in stand-alone mode, i.e. without a connection to the
public grid. The inverter has functions for preventing operat-
ing in stand-alone mode.
● Use in mobile solar systems
