manualshive.com logo in svg

Delta DVW SERIES, Руководство пользователя, Страница: 75 / 108

Поделиться
Скачать
Delta DVW SERIES Скачать руководство пользователя страница 75

DVW Series Industrial IEEE 802.11 a/b/g/n Wireless AP/WDS/Client/Gateway User Manual

 

3.5.7

 

Storm Control 

A traffic storm occurs when incoming packets flood the LAN, which causes the decreasing of the 

network performance. Storm control protects can avoid flooding packets affect the network 

performance. DVW provides you to configure both Storm Protection and Multicast & Flooding for 

LAN and WLAN for incoming and outgoing traffic. 

 

 

Description 

Factory Default 

Storm Protection 

 

Enable:

 Storm protection is enabled. 

 

Disable:

 Storm protection is disabled. 

Disable 

3.6

 

Auto Warning Settings 

Industrial Ethernet devices in an industrial environment are very important. These devices usually 

need to work for a long time and are usually located at the end of the system. So if the Delta DVW 

devices need to be maintained, it must provide some messages to the maintainer. Even when the 

maintainers or engineers do not stay in the control room, they still need to be informed the status of 

the devices. Delta DVW devices provides different approaches to warn engineers automatically, 

such as log, E-mail, relay output and SNMP trap. 

3.6.1

 

SysLog 

Syslog function provides you to monitor the device. When faults, errors, configuration changes or 

specified events happen, this function can generate messages and forward the messages to a 

specified syslog server. 

3 - 5 3

 

Содержание DVW SERIES













































































































Отзывы:

Нет отзывов