Delta DVW SERIES Скачать руководство пользователя страница 70

Страница: 70 / 108

Chapter 3 Featured Function

3.5.4

MAC Filters

The MAC filter can accept or drop packets with specified MAC addresses. The MAC address can be

configured up to 8 entries.

Notice:

Please check the Active check box for the entries which you want to specify and

please remember to configure the policy in

Filter Configuration

page.

3.5.4.1

IP Protocol Filters

The IP Protocol filter can accept or drop packets with specified IP protocol and source/destination

addresses. The policy can be configured up to 8 entries.

DVW provides 3 IP protocols items: All, TCP, UDP and ICMP. The Source IP and Destination IP

must be specified. You can specify an IP address or a range of IP addresses.

For example, if you enter the IP address 192.168.1.1 and netmask 255.255.255.255, its mean only

on IP address 192.168.1.1 is specified. If you enter the IP address 192.168.1.1 and netmask

255.255.255.0, its mean the range of IP address 192.168.1.1 to 192.168.1.254 are specified.

3-48

Содержание DVW SERIES













































































































Результаты поиска

Содержание DVW SERIES

Отзывы:

Delta DVW SERIES, Руководство пользователя, Страница: 70 / 108

Результаты поиска

Содержание DVW SERIES

Отзывы: