Delta DVS-328 series, Руководство пользователя

Страница: 71 / 246

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l
3 - 5 0
Description Factory default

Disable: STP is disabled for the port or port channel.

Enable: STP is enabled for the port or port channel.
Port Forwarding State
This field displays whether the port is up and forwards traffic (Forwarding) or down and
discards traffic (Discarding).
Discarding
Protocol Migration
Force the specified port to set the mcheck flag to transmit RST or MST BPDUs:

True: The interface can receive the BPDU flood.

False: The interface can not receive the BPDU flood.
False
PointToPoint Status
Specify the point-to-point status of the interface in the CIST:

ForceTrue: The interface has a point-to-point connection to a switch, bridge, or end
node, irrespective of the actual connection.

ForceFalse: The interface does not have a point-to-point connection to a switch,
bridge, or end node, irrespective of the actual connection.

Auto: The type of connection is automatically detected.
hAuto
3.3.1.4 CST Port Status
The port role types of the interface:

Root Port: It is a concept of STP. Every non-root switch has one root port. The lowest cost of the path to the
root switch will be the root port.

Master Port: It is a concept of MSTP. It must meet two conditions: one is the root port in CIST; the other one
is an edge port. The edge port is the port which connects two regions.

Designated Port: The port responsible for forwarding data to the downstream network segment or device.

Alternate Port: The standby port for the root port or master port. If a root port or master port is blocked, the
alternate port becomes the new root port or master port.