Delta DPH-600K, Руководство пользователя

Страница: 206 / 232

7 - 4 6
Modulon DPH Series
On-Line
1
2
3
4
Security
Leakage
Fire
Smoke
UPS-1.1 SETUP MAINTENANCE EVENT LOG LOG IN
Administrator
MEASUREMENT
EMS Setting
10:15
Sep 25,2018
EMS SETTING INPUT
CONTACT
SENSOR
ID 0
EMS0
Title ID Status
Disable
Input
Contact
NO/NC Title Event Type
Normally Open
Normally Open
Normally Open
Normally Open
Warning
Warning
Warning
Warning
NOTE:
After connecting the optional EMS 1000 (EnviroProbe) to the UPS, you have to
manually set both
ID and Status to enable the EMS function of the UPS. Settings
for the other items can be adjusted according to your needs; the default values are
VKRZQLQWKH¿JXUHVDERYH
All the settings in the table below are related to the items shown on the EMS screen in the
MEASUREMENT
ĺ
EMS . Please refer to
(06
.
Item Sub Item Description
SENSOR
ID
Set the ID # (ID 0/ ID 1/ …/ ID 15) according to the ID DIP
switch setting of the EMS 1000 (EnviroProbe) device.
NOTE:
If the ID # setting is wrong, the warning message
'
The EMS 1000 ID # Communication Fail ' will
appear.
Title Set the title for each EMS 1000 (EnviroProbe) device.
Status
The status Enable / Disable determines whether or
not the LCD shows the information of the EMS 1000
(EnviroProbe) device (ID #) on the screen.
Temperature
Set the temperature (°C) values for Alarm/ Warning/
Recovery.
Humidity Set the humidity (%) values for Alarm/ Warning/ Recovery.