Delta DPH-600K, Руководство пользователя

Страница: 192 / 232

7 - 3 2
Modulon DPH Series
Item Description
On-Line Mode
Set up the UPS in On-Line mode. In On-Line mode, it is the inverter
to supply power to the connected loads.
Green Mode
Set up the UPS in Green mode. In Green mode, it is the inverter to
supply power to the connected loads and the power modules take
turn to rest according to the situation of total load capacity.
ECO Mode
Set up the UPS in ECO mode. In ECO mode, it is the bypass to
supply power to the connected loads. It is suggested that you set
the UPS in ECO mode only when there is stable main AC power.
Otherwise, power supply quality will be compromised.
Energy Recycle
Mode
Set up the UPS in Energy Recycle mode. In Energy Recycle mode,
the full load output can be simulated for the aging test without real
output to the loads.
Frequency
Conversion
Mode
Set up the UPS in Frequency Conversion mode. In Frequency
Conversion mode, it is the inverter to supply power to the connected
ORDGVZLWKD¿[HGRXWSXWIUHTXHQF\3OHDVHQRWHWKDWWKHRXWSXWZLOO
EHWHUPLQDWHGRQFHWKHLQYHUWHULVWXUQHGRႇ
NOTE:
Frequency Conversion mode is only applicable to single
UPS but not to parallel UPSs.
7.10.3 Output Setting
Path:
SETUP
ĺ2XWSXW6HWWLQJ
After entering the OUTPUT SETTING screen (shown in the figure below), you can set
XSWKHIROORZLQJLWHPV7KHVHVHWWLQJVPXVWEHFDUULHGRXWE\TXDOL¿HGVHUYLFHSHUVRQQHO
Please contact Delta customer service for assistance.
Bypass
60
1
Hz
240
V
0
0.5 Hz/s
0.5T_AC
2 s 6 s
UPS-1.1 SETUP MAINTENANCE EVENT LOG LOG IN
Administrator
MEASUREMENT
Output Setting
OUTPUT SETTING
Frequency Voltage
0.0
V
Voltage Compensation
PM Redundancy Asnyc Transfer Time
Module Sequential Start System Sequential Start
Slew Rate
10:15
Sep 25,2018