Delta AH10EN-5A Series, Руководство по эксплуатации

Страница: 29 / 132

C h a p t e r 4 E I P B u il d e r
4 - 5
4_
4.2.2 Set up the IP Address (Static IP)

Operation Steps:
When using an EIP product with a static IP address, users need to set up the IP address through the
HWCONFIG in the ISPSoft.
Creat e
Project I SPSof t
O pen
HWCO NF IG
Set up
IP Address
Create
EI P M odule
Y EI P
PLC
N
Download
HWCO NFI G
Refer to section 4.1.1 for how to set up an EIP module through the HWCONFIG in the ISPSoft.
1. Configure the network parameters
1.1 AH10EN-5A

Double-click the AH10EN-5A in the HWCONFIG to open the Parameter Setting page.

Set up the IP address under the Network Parameters node. Once the setup is done, click OK to leave
this page.