13
The on/off buttons (A) and (B) Fig. 19 are located on the
front of the motor housing. To turn the machine "ON",
push the "ON" button (A).
To turn the machine "OFF", push the "OFF" button (B).
STARTING AND STOPPING THE
DUST COLLECTOR
A
B
OPERATION
Fig. 19
IMPORTANT: When the machine is not in use, the
“ON” button (A) Fig. 19 should be locked
to prevent
unauthorized use,
using a padlock (C) Fig. 20 with a
3/16" diameter shackle through the hole beside the
button.
LOCKING SWITCH IN THE “OFF” POSITION
C
When using this dust collector, do not pick up anything that is burning, smoldering, or smoking,
such as matches, cigarettes, or hot ashes.
Do not use this machine to vacuum combustible explosive materials, such as coal, grain, or
other finely-divided combustible materials.
Do not use this machine to vacuum hazardous, toxic, or carcinogenic materials, such as
asbestos, pesticide, or lead-based paint debris.
Fig. 20
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the
DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
MAINTENANCE
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed
air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They
could possibly dissolve or otherwise damage the material.
WEAR CERTIFIED SAFETY EQUIPMENT
FOR EYE, HEARING AND RESPIRATORY PROTECTION
WHILE USING COMPRESSED AIR.
FAILURE TO START
Should your machine fail to start, check to make sure
the prongs on the cord plug are making good contact
in the outlet. Also, check for blown fuses or open circuit
breakers in the line.
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table,
extension table or other work surface weekly. Or use a
commercially available protective product designed for
this purpose. Follow the manufacturer’s instructions for
use and safety.
To clean cast iron tables of rust, you will need the
following materials: a pushblock from a jointer, a sheet
of medium Scotch-Brite™ Blending Hand Pad, a can of
WD-40® and a can of degreaser. Apply the WD-40 and
polish the table surface with the Scotch-Brite pad using
the pushblock as a holddown. Degrease the table, then
apply the protective product as described above.
