Delta Separations CUP 15 Series, Руководство по эксплуатации и обслуживанию

Страница: 21 / 38

21
Spin Dry Cycle
The Spin Dry Cycle ( Figure 5-6 ) is selected on the HMI and the sequenced spin times with
corresponding rpms are set. Push START to run the cycle.
Figure 5-6. Spin Dry Cycle
RPM Control
The RPM Control ( Figure 5-7 ) is available for all cycles.
Figure 5-7. RPM Display
Speed Control Value Increase Key
Use the up arrow to increase the basket RPMs during the cycle.
Speed Control Value Decrease Key
Use the down arrow to decrease the basket RPMs during the cycle.
NOTE: Holding the up or down arrow key for longer than 3 seconds will cause the RPMs to
rapidly increase.