Delta Separations CUP 15 Series, Руководство по эксплуатации и обслуживанию

Страница: 18 / 38

18
5. Control Panel Overview
There are two control panels provided as part of the CUP 15. The Operator Control Panel
is mounted on the same frame as the centrifuge platform and is used for direct operation of
the equipment within the extraction zone. The
Main Control Panel is mounted on a
separate modular frame that is tethered outside the extraction zone. Both panels have been
designed and built in accordance with Class 1 Div 2 standards, with Operator Panel UL
certified for use within C1D2 hazardous locations. See
Figure 5-1 .
Figure 5-1. Control Panels
NOTE: Make sure the Main Control Panel is located outside of the extraction zone. The
system Operator Panel is attached to the mainframe of the system and is rated for use
within C1D2 environments. The Main Control Panel is located outside of the C1D2 HAZ
zone. There is 20 ft of cord tethering the main drive panel to the system.