Delta OHM HD32MT.3, Руководство по эксплуатации

Страница: 44 / 62

HD32MT.3
- 44 -
V1.2
11.16 E-
MAIL SETTINGS
Command Description P
MAILSERVER Prints the e-mail server address.

MAILSERVER c...c Sets the string c...c (max 32 characters) as e-mail server address.

MAILPORT Prints the number of the e-mail server port.

MAILPORT nn Sets the number of the e-mail server port to value nn.

MAILACCOUNT Prints the account (e-mail address) used to send e-mails.

MAILACCOUNT c...c Sets the string c...c (max 64 characters) as account (e-mail address)
used to send e-mails. This address is what will appear as the sender
of the e-mails sent.

MAILPASSWORD Prints the password of the e-mail account.

MAILPASSWORD c...c Sets the string c...c (max 32 characters) as password of the e-mail
account.

MAILVALIDATION Prints the setting for the e-mail validation property.

MAILVALIDATION p Sets property p for e-mail validation.
p=N

No validation
p=Y

Validation requested
p=S

SSL mode

DESTINATION n Prints the e-mail address of recipient number n (n=0,1).

DESTINATION n c...c Sets the string c...c (max 64 characters) as e-mail address of recipi-
ent number n (n=0,1).

TESTEMAIL Checks the e-mail transmission. Sends a test file in text format. The
test file can be a user-created file (to copy to the SD card with the
name "mailtst.txt") or, in the absence of the user file, a default file
(named "xmailtst.txt") created by the datalogger.
Note: if a parameter is not set, the data logger response is "?VOID|".
11.17 SMS
SETTINGS
Command Description P
PHONE i Prints the mobile phone number with index i (i=0,1,2,3).

PHONE i n...n Sets n...n (max 16 digits) as mobile phone number with index i
(i=0,1,2,3).
The set numbers are those from which the SMS commands will be
accepted and to which will be sent SMS alarm (Note: to the mobile
phone number with index 3 the SMS alerts are not sent).
The first three numbers (i=0,1,2) must be entered with the interna-
tional prefix in the form "+..." (e.g., +393481234567). The interna-
tional prefix is not necessary for the fourth number (i=3).

SMSKEYCODE Prints the keyword for the acceptance of SMS commands.

SMSKEYCODE c...c Sets the string c...c (max 16 characters) as keyword for the ac-
ceptance of SMS commands.

SETSMS n Prints the content of SMS with index n (n=0,1,2,3).

SETSMS n c...c Sets the string c...c (max 64 characters) as content of SMS with in-
dex n (n=0,1,2,3).
The SMS with index n is automatically sent by the data logger when
the alarm condition with index n occurs.

SENDSMS n Sends the SMS with index n (n=0,1,2,3).
TEST indication is added to the SMS content to indicate that the SMS
has not been sent due to the alarm occurrence.

TESTSMS "c...c" Sends an SMS containing the string c...c (max 64 characters) to all
the stored phone numbers.
