FRONT MENU OPERATION
SM3300
18 / 30
DELTA ELEKTRONIKA B.V.
rev. Jan. 2022
6
FRONT MENU OPERATION
6.1
ACCESSING THE MAIN MENU
After switching on the unit, the right side of the display shows
the texts 'Menu', 'Lock' and 'on/Off' (see fig. 6 - 1). Press the
upper push button right from the text 'Menu' to enter the menu
of the unit.
Operate the left rotary encoder marked 'V' to choose one of
the sub menu's.
To change a setting, operate the right encoder marked 'A'.
By using the upper or middle push buttons, one can
respectively go back to the previous menu level (Back) or go
deeper in the menu (Select). See below paragraphs for the
possibilities.
In every menu level, it is possible to switch the DC power
output on or off, using the lower push button.
6.2
MENU MAP
The overview in fig. 6 - 2 shows the tree structure of the main
menu. Not all items are already implemented in the present
firmware package. Regularly check the Delta Elektronika
website for new releases. The unit can be updated with the
latest package via the web interface.
6.3
MENU SETTINGS
6.3.1
SYSTEM INFO
UNIT
VERSION
Displays the version of the firmware package.
SERIALNR
Displays serial number
PUD
Displays 'Protected User Data'
STATUS
TEMPERATURE
Displays the highest temperature inside the power supply.
INPUT
Displays mains Vac and Iac.
6.3.2
CONFIGURATION
FRONT SETTINGS
LCD SETTINGS
LIGHT ON
Select the setting of the display back light level during
operation of the rotary encoders or the push buttons.
A range of 20 - 100% is available.
The default setting is 50%.
LIGHT DIM
Select the setting of the normal display back light level.
A range of 0 - 100% is available.
The default setting is 20%.
DIM DELAY
Select the time after which the display switches back from
a high level during encoder or button operation, and the
normal back light level.
A range of 0 - 200 seconds is available (0 = do not dim).
The default setting is 5 seconds.
CONTRAST
Select the setting of the display contrast.
A range of 0 - 100% is available.
The default setting is 60%.
INDICATORS
There are 13 different indicators available: OT, ACF, DCF,
PSOL, Interlock, RSD, Internal error, LAN, V-limit, I-limit,
USB, Sequencer and Interfaces.
Select the setting for each indicator separately.
Possible settings are NONE, VISUAL, AUDIO and
VISUAL&AUDIO.
SYSTEM INFO
UNIT
VERSION
SERIALNR
PUD
STATUS
TEMPERATURE
INPUT
CONFIGURATION
FRONT SETTINGS
LCD SETTINGS
LIGHT ON
LIGHT DIM
DIM DELAY
CONTRAST
INDICATORS
SOUNDS
LANGUAGE
POWER-ON STATE
VOLTAGE
CURRENT
OUTPUT
PRG SOURCE
V-SETTINGS
I-SETTINGS
POWER SINK
STATUS
SETTINGS
MASTER SLAVE
STATUS
SETTINGS
SETUP
RECALL SETUP
SAVE SETUP
PROTECTION
ACCESS SECURITY
CHANGE KEY
LOCK OPTIONS
UNLOCK OPTIONS
LIMITS
VOLTAGE LIMIT
CURRENT LIMIT
INTERFACES
LAN
ADDRESS
SUBNETMASK
GATEWAY
DHCP
IP-VERSION
MAC-ADDRESS
SLOTS
OVERVIEW
fig 6 - 2
Menu tree structure.
fig 6 - 1
At the right side of the display, the 3 main menu
items can be chosen.
