background image

                                                                                                                                     

2007-10-12

5011642701-DNT1

 

DeviceNet Communication Module (CME-DN01) Instruction Sheet 

‹

 DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc

‹

 

Please thoroughly read and understand the following contents to ensure correct use before operation. 

‹

 

The content of this instruction sheet may be revised without prior notice. Please consult our distributors or 
download the most updated version at http://www.delta.com.tw/industrialautomation

 
A. 

Panel Appearance and Dimensions 

72.2 [2.84]

57.

3

[2.

26]

14.

3

[0.

57]

59

.7

[2

.35]

3.5 [0.14]

35.8 [1.41]

CME-DN01

ADD1 ADD2

SP

500K

250K

125K

BAUD

M OD

NET

UNIT: mm(inch)

1

5

4

3

2

 

 

1. For RS-485 connection to VFD-E 
2. Communication port for connecting DeviceNet network 
3. Address selector 
4. Baud rate selector 
5. Three LED status indicators for monitor 

B. 

Wiring and Settings 

Refer to following diagram for details. 

CME-DN01

ADD1 ADD2

SP

500K

250K

125K

BAUD

MOD

NET

MAC address Date Rate

CAN-L

V+

Empty
pin

CAN-H

V-

1: Reserved  

2: EV     

5: SG+  

6: Reserved 
7: Reserved  
8: Reserved

3: GND 

4: SG-            

   

Setting baud rate

 

BAUD

0

 

Switch 

Value

 

Baud 

Rate

 

0 125K 
1 250K 
2 500K 

Other 

NOT 

used 

 

Setting MAC addresses:

 

use decimal system. 

ADD1

ADD2

 

C. Mounting 

Method 

Step1 and step2 show how to mount this communication 
module onto VFD-E. The dimension in the following is for 
your reference. 

 

Dimensions 

UNIT: mm(inch)

 

STEP 1 

 

STEP 2 

 

D. Power 

Supply 

No external power is needed. Power is supplied via 
RS-485 port that is connected to VFD-E. An 8 pins RJ-45 
cable, which is packed together with this communication 
module, is used to connect the RS-485 port between 
VFD-E and this communication module for power. This 
communication module will perform the function once it is 
connected. Refer to the following paragraph for LED 
indications.

 

E. LEDs 

Display

 

1. 

SP:

 Green LED means in normal condition, Red LED 

means abnormal condition.   

2. 

Module:

 Green blinking LED means no I/O data 

transmission, Green steady LED means I/O data 
transmission OK. Red LED blinking or steady LED 
means module communication is abnormal. 

3. 

Network:

 Green LED means DeviceNet 

communication is normal, Red LED means abnormal.

 

NOTE

 

Please download the auto EDS generator and user manual 
at http://www.delta.com.tw/industrialautomation/ 

Отзывы: