background image

PRELIMINARY DATASHEET 
DS_ND12S50A_07172008 

FEATURES 

Š

 High 

efficiency: 

92.5% @ 12Vin, 3.3V/50A out 

y

 

Size: 61.0x31.8x10.2mm     

(2.40”×1.25”×0.40”) 

Š

 

Voltage and resistor-based trim 

Š

 

No minimum load required 

Š

 

Output voltage programmable from        

0.9Vdc to 3.63Vdc via external resistors 

Š

 Fixed 

frequency 

operation 

Š

 

Single-in line package (SIP) 

Š

 

Input UVLO, output OCP, OTP, SCP 

Š

 Remote 

ON/OFF 

(Positive) 

Š

 

Power good output signal (open collector) 

Š

 

Output voltage sense 

Š

 

ISO 9001, TL 9000, ISO 14001, QS9000, 

OHSAS18001 certified manufacturing facility 

Š

 

UL/cUL 60950-1 (US & Canada), TUV 

(EN60950-1) - pending

 

 
 

APPLICATIONS 

Š

 DataCom 

Š

 

Distributed power architectures 

Š

 Servers 

and 

workstations 

Š

 

LAN / WAN applications 

Š

 

Data processing applications

 

OPTION

 

Š

 

Negative on/off logic 

Š

 Current 

sharing 

Delphi ND Series Non-Isolated Point of Load 
DC/DC Power Modules: 12Vin, 0.9V~3.63Vout, 
50Aout 

 
The Delphi ND Series, 12V input, single output, non-isolated point of 
load (POL) DC/DC converters are the latest offering from a world leader 
in power systems technology and manufacturing — Delta Electronics, 
Inc. The ND/NE product family is the second generation, non-isolated 
point-of-load DC/DC power modules for the DataCom / Networking / IT 
Applications and it will help to cut the module size by 35% to 50% 
compared to the first generation NC series POL modules. The ND/NE 
product family provides 6A to 60A of output current in a vertically or 
horizontally mounted through-hole package and the output can be 
resistor trimmed from 0.9Vdc to 3.63Vdc. It provides a very cost 
effective, high efficiency, and high density point of load solution. With 
creative design technology and optimization of component placement, 
these converters possess outstanding electrical and thermal 
performance, as well as extremely high reliability under highly stressful 
operating conditions. 

 

Содержание Delphi ND Series













Отзывы: