Delta Electronics BX12.6AC100, Руководство по эксплуатации и установке

Страница: 30 / 68

- Please make sure to use the proper size AC cable.
- Please choose the terminals as shown below for wires crimping.
- Failed to follow these instructions may cause AC plug damage.
CAUTION: Machine And Equipment Damage May Occur!
Follow the steps below to strip the wires before assembling the AC plug as
shown in Figure 3-12 :
(1) Remove 55 mm (2.2 inch) of AC cable outer jacket.
(2) Trim the L-N(Grid), L-N(Load) wire to 52.5 mm (2.0 inch).
(3) Strip 10 mm (0.5 inch) of insulation from all wires ends.
(4) Crimp terminals for all wires.
Figure 3-12 : Striping the wires
outer jacket
12 mm
[0.5 in.]
52.5 mm
[2.0 in.]
55 mm [2.2 in.] (PE)
3.5.3 AC Plug Assembly
DANGER: ELECTRICAL HARZARD!!
- Any electric power connected to the battery pack during cabling is prohibited.
- Please make sure any breaker is turned off before connecting cables.
30
Installation