Delta Electronics AH500, Руководство пользователя

Страница: 63 / 547

A H 5 0 0 M o t i o n C o n t r o l M o d u l e M a n u a l
3.4 Auxiliary Relays
Auxiliary relay (M): Auxiliary relay numbers are decimal numbers. There are 4096 M devices
(M0~M4096) in an AH500 series motion control module.
Functions of auxiliary relays: A M device has an output coil and a Form A contact/Form B contact.
There is no limitation on the number of times an M device can be used in a program. Users can
combine control loops by means of M devices, but can not drive external loads by means of M
devices.
If a power cut occurs when an AH500 series motion control module runs, the M devices in
the AH500 series motion control module will be reset to OFF. When the supply of electricity is
restored, the M devices are still OFF.
3.5 Special Auxiliary Relays
Special auxiliary relay (SM): Special auxiliary relay numbers are decimal numbers. There are
16384 SM devices (SM0~SM16383) in an AH500 series motion control module.
Functions of special auxiliary relays: A SM device has an output coil and a Form A contact/Form B
contact. There is no limitation on the number of times a SM device can be used in a program.
Users can combine control loops by means of SM devices, but can not drive external loads by
means of SM devices. Every SM device has its own specific function. Please do not the SM
devices which are not defined.
3.6 Stepping Relays
Stepping relay (S): Stepping relay numbers are decimal numbers. There are 1024 S devices
(S0~S1023) in an AH500 series motion control module.
Functions of stepping relays: A S device has an output coil and a Form A contact/Form B contact.
There is no limitation on the number of times an S device can be used in a program. Users can
combine control loops by means of SM devices, but can not drive external loads by means of S
devices. An S device can be used as a general auxiliary relay.
3.7 Timers
Timer (T): Timer numbers are decimal numbers. There are 256 timers (T0~T255) in an AH500
series motion control module. Users can change a timer to a latching timer by setting a parameter.
Functions of timers: 10 milliseconds are a unit of measurement for time. A timer counts upwards
for measuring time which elapses. If the present timer value is equal to the setting value, the
output coil will be ON. The setting value can be a decimal value preceded by K, or the value in a
data register.
Actual time measured by a timer= Unit of measurement for time x Setting value
1. If the instruction TMR is executed, a timer will count for measuring time which elapses once. If
the timer value matches the setting value, the output coil will be ON.
T0
Y0.0
X0.0
TMR T0 K100
X0.0
T 0
Y0.0
Pr es ent value
T he setting value is K 100.
1 s econd
If X0.0 is ON, the timer T0 will count
upwards from the present time value
every 10 milliseconds. If the present
timer value matches the setting value
K100, the output coil T0 will be ON.
If X0.0 is OFF, or there is a power cut, the
present value in T0 will become 0, and
the output coil T0 will be OFF.
3 - 6