Delta Electronics AE80THTD, Руководство пользователя

Страница: 253 / 329

Chapter 4 Macro Function
|
ScrEdit Software User Manual
4-32
Revision Apr. 30th, 2007, 2007PDD23000002
End command is used to end the macro program. Statements2 will not be executed after Statemenets1
is executed. The program will execute from the command of the first line next time. Please note that
END means finishing executing macro. If END command is used in sub-macro, it indicates the
program is end here. If the user wants to return to the original macro program, please use RET
command.
Example:
$1 = 10
$1 = $1 + 1
END
$1 = $1 + 1
After the operation, the result is $1 = 11, not $1 = 12 as the END command has ended the macro
program.
„ Bit Settings
Please refer to the following table for the commands of Bit Settings.
Command Equation Description
SETB SETB V1 Set V1 Bit to be ON
CLRBL CLRB V1 Set V1 Bit to be OFF
INVB INVB V1 Set V1 Bit to be inversed
GETB V1 = GETB V2 Get V2 Bit value and store in V1
Table 4.3.6 Bit setting command table
„ SETB
Set specific bit to be ON.
Equation: SETB V1
Set V1 Bit to be ON
Example:
Set the value of 5th Bit within the internal memory $1 to be ON.
$1 = 0000000000000000B
SETB $1.5
The result is $1 = 0000000000010000B
„ CLRB
Set specific bit to be OFF.
Equation: CLRB V1
Set V1 Bit to be OFF
Example:
Set the value of 15th Bit within the internal memory $2 to be OFF.